|
|
Radio Indicator MKII Radio Indentification System Identify...Locate...Respond! |
Setup |
Optimising the Radio Indicator The Radio Indicator has a computer chip which detects a voltage level from the speaker. This voltage is different for all radios and is also dependant on volume level. It is important to Optimise each channel of the Radio Indicator by pressing the setup button. 1. Press the Set Button, you will notice that each LED will flash briefly before moving to the next LED. Note: This will optimise each channel of the Radio Indicator. |
Timer Control The Radio Indicator has a Timer Adjustment. This adjustment will vary the LED Red On time. Time can be varied from 5 seconds to 60 seconds. Note: The timer begins at the end of voice begin heard, if noise is heard again before the timer ends this will restart the timer. |
TROUBLE SHOOTING " One channel isn't working all the time Cause - Possible Volume Level has been Decreased after setup Solution - Go to Step 3 Optimising Radio Indicator " One channel is always On Cause - Possible Volume Level has been Increased after setup Solution - Go to Step 3 Optimising Radio Indicator |