|
|
Radio Indicator MKII Radio Indentification System Identify...Locate...Respond! |
Installation |
INSTALLATION Step 1 - Connecting to radios Nominate 1 to 4 radios you require monitoring. The spacing between radios must be with-in 2x 1.5m and 2x 3m from the Radio Indicator. 1. Install the 3.5mm mono adaptors to the external speaker jacks on your radios. |
2. Next connect the 3.5mm mono leads to one side of the adaptor. |
3. Connect the external speaker to the other side of the adaptor. |
4. Connect the other end of the 3.5m mono lead to the Radio Indicator input SPK 1 |
5. Drill a 9mm hole through the wall close too the radio |
6. Feed the lead of the LED indicator through the hole and fix the LED indicator to wall with glue or blutac etc. |
7. Connect other end of the LED to the Radio Indicator to LED 1 |
8. Repeat steps 1 to 7 for other radios |
9. Connect the power lead to your 12v power source. 10. Connect the power lead to the Radio Indicator. Note: The Radio Indicator is always on while power is connected. |